Introduction of Heat treatment tungsten vacuum furnace
HIQ-22TVF high temperature Tungsten vacuum furnace is mainly used in sintering cemented carbides, stainless steel line molding, stainless steel fiber, magnetic materials,and ceramic materials,and it also can be used in power metallurgy, refractory
metals and magnetic material industry.We can sinter super hard, alloy,tungsten, titanium, copper, tantalum,stainless
steel and rare-earth permanent magnetic material. Since the heater symmetrical distribute along the vacuum chamber, and temperature uniformity is high,you can actualize semi-automatic and automatic control according to your demands.
Features of Heat treatment tungsten vacuum furnace
1.Maximum energy efficiency is achieved by surrounding chamber thermal-efficient alumina fiber ceramic insulation.
2.Heavy duty double layer structure with cooling fan. Lower teperature in outside case.
3.PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier).
4.Power control with 30 segments programmable.
Parameters of Heat treatment tungsten vacuum furnace
|pressure rising rate||maximum temperature||Air pressure|
|HIQ-40||Dia160*160||200||4×10-1 or 4×10-3||0.65||2200||6/10|
|HIQ-60||Dia200*200||300||4×10-1 or 4×10-3||0.65||2200||6/10|
|HIQ-80||Dia220*220||500||4×10-1 or 4×10-3||0.65||2200||6/10|
|HIQ-150||Dia300*300||800||4×10-1 or 4×10-3||0.65||2200||6/10|
|HIQ-200||Dia400*400||1200||4×10-1 or 4×10-3||0.65||2200||6/10|
|HIQ-300||Dia500*500||1500||4×10-1 or 4×10-3||0.65||2200||6/10|
We are real and professional OEM of industry furnace over 10 years who has 10 staff of designer and technican experienced for years,
Lab muffle furnace,tube furnace,atmosphere furnace;
Dental zirconia sintering furnace;
Industrial vacuum furnace,vacuum heat treatment furnace;
Vacuum hot press furnace;
Vacuum oil quenching furnace;
Vacuum gas quenching furnace;
Looking forward to our good cooperation!