Leadfree Double Wave Soldering Oven TB980C
Claws design of synchronal chain
No noise, convey smoothly.
Control system: Industrial computer, system runs reliable and stable.
Far IR preheating system: Prevent the temperature going down.
Latest pressure-increasing type flux coating system: Spray evenly to reduce the usage of the flux.
Conveying system: Imported motor driving, and equip with overload protection device.
The width of the substrate can be adjusted automatically by computer.
Specfication:
Claws design of synchronal chain
No noise, convey smoothly.
Control system: Industrial computer, system runs reliable and stable.
Far IR preheating system: Prevent the temperature going down.
Latest pressure-increasing type flux coating system: Spray evenly to reduce the usage of the flux.
Conveying system: Imported motor driving, and equip with overload protection device.
The width of the substrate can be adjusted automatically by computer.
Specfication:
| technology parameter | TB980C |
| Preheating Section (Infrared+ hot air) | 4Kw * 2 |
| Preheating temperature | Room-temperature ~180 |
| Preheating control mode | PID Mode |
| Power of tin stove heating tube | 2KW*8 |
| Jointing control mode | PID Mode |
| Wave crest motor | imported high temperature resistant motor |
| Soldering tin capability | Max.500kg (Sn63Pb37); 430Kg(Sn100%) |
| PCB width | Max.250mm |
| PCB Transmission speed | 0.5~1.8m/min |
| Transmission motor power | 90W |
| Gross power | 36Kw |
| Working power | 18Kw |
| Power supply | Three-phase,380V,50Hz |
| Air supply | above 5Mpa |
| Gas pressure of spray | 0.25Mpa~0.4Mpa |
| Spray gun driving type | need a spraying machine outside |
| Cooling system | wind cooling system. |
| Dimension (L*W*H) | 4120 *1280 *1630MM |
| Weight | about 1050kg |