SJ301 Welding Flux For Saw Wire EL8,EL12,EM12K
SJ301 TECHNICAL DATA
(1)Specification:
AWS-A5.17 F6A0-EL8 F7A2-EM12K EN760 SA CS 1 89 AC H5
(2)Description:
SJ301 is an agglomerated calcium-silicate type welding flux. Basicity: 1. 0 (B//W) It is gray and round grain,mesh:10-40.Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes(especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained,thus allowing the flux to be used with wires with a low Mn content.
(3)Applications:
The flux is fit for the submerge-arc welding of low-carbon steel and low-alloy steel. Butt and flat fillet welding of miniature LPG tanks pipeline steel,ships,vehicles,agricultural implements,machinery,boilers,bridges,structural steels.
(4)Chemical Composition(%)
(5)Mechanical Performance of the Deposited Metal
(6)The Instruction of usages:
Re-dried under 300-350ºC for 2 hours.
Rust,grease and moisture on the weldment should be removed before welding.
SJ301 Product Picture
APPLICATION:Submerged-Arc Welding Of Low-Carbon steel & Low Alloy Steel
(1)Miniature LPG Tanks Pipeline Steel
(2)Vehicles
(3)Ships
(4)Agricultural Implements
(5)Machinery
(6)Briages
(7)Structural Steels
(8)Spiral Welded Pipe
Company Brief Introduction
Packing Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM Packing Design Can Be Accept According To Your Requirement
Shipping
Customer's Visit
FAQ
1)Are you a factory or a trading company?
LaiWu HuLin Welding Materials Co., Ltd. is a professional factory of welding wire&welding flux, at the same time, we have own professional marketing team to expand the overseas market.
2)Is OEM available?
Yes, OEM is available.
3)Is the sample available?
Yes, free samples are available for you to test the quality.
4)Have the products been tested before shipping?
Yes, of course, all of our welding products would have been tested before shipping on board.
The Mill Test Certificate can be provided by our professional test Lab.
5)What's benefit will you bring?
Your clients will be satisfied with the quality and service.You can enjoy high reputation from your markets and obtain more orders.
6)What about the price terms?
CIF, CFR, FOB
7)How about the payment terms?
ONE:30% T/T in advance, 70% balance against B/L copy.
TWO:L/C at sight.
8)What about the lead/shipping time?
Within 5~25 Days After Receipt Of Payment.
9)What is the MOQ?
20-25 Tons For One Full 20ft Container Load.
10)What about the package?
Forward Welding Package/Neutral Package/OEM Package
SJ301 TECHNICAL DATA
(1)Specification:
AWS-A5.17 F6A0-EL8 F7A2-EM12K EN760 SA CS 1 89 AC H5
(2)Description:
SJ301 is an agglomerated calcium-silicate type welding flux. Basicity: 1. 0 (B//W) It is gray and round grain,mesh:10-40.Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes(especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained,thus allowing the flux to be used with wires with a low Mn content.
(3)Applications:
The flux is fit for the submerge-arc welding of low-carbon steel and low-alloy steel. Butt and flat fillet welding of miniature LPG tanks pipeline steel,ships,vehicles,agricultural implements,machinery,boilers,bridges,structural steels.
(4)Chemical Composition(%)
| SiO2+TiO2 | Al2O3+MnO | CaO+MgO | CaF2 | S | P |
| 25-35 | 30-40 | 15-25 | 5-15 | ≤0.05 | ≤0.05 |
Wires | Standard Models | Yield Point Rel(MPa) | Tensile Strength Rm(MPa) | Elongation A (%) | Impact Value Kv2(J) |
| EL8 EM12K | F6A0-EL8 F7A2-EM12K | ≥350 ≥410 | 415-550 480-650 | ≥22 ≥30 | ≥40(0ºC) ≥60(-20ºC) |
Re-dried under 300-350ºC for 2 hours.
Rust,grease and moisture on the weldment should be removed before welding.
SJ301 Product Picture
APPLICATION:Submerged-Arc Welding Of Low-Carbon steel & Low Alloy Steel
(1)Miniature LPG Tanks Pipeline Steel
(2)Vehicles
(3)Ships
(4)Agricultural Implements
(5)Machinery
(6)Briages
(7)Structural Steels
(8)Spiral Welded Pipe
Company Brief Introduction
Packing Details:
(1)Bag:25 KGS/Kraft Bag With Plastic Lining Inside
(2)Pallet:40 Bags(1 Ton)/Plywood Pallet
(3)Container:20-24 Tons/Container
(4)OEM Packing Design Can Be Accept According To Your Requirement
Shipping
Customer's Visit
FAQ
1)Are you a factory or a trading company?
LaiWu HuLin Welding Materials Co., Ltd. is a professional factory of welding wire&welding flux, at the same time, we have own professional marketing team to expand the overseas market.
2)Is OEM available?
Yes, OEM is available.
3)Is the sample available?
Yes, free samples are available for you to test the quality.
4)Have the products been tested before shipping?
Yes, of course, all of our welding products would have been tested before shipping on board.
The Mill Test Certificate can be provided by our professional test Lab.
5)What's benefit will you bring?
Your clients will be satisfied with the quality and service.You can enjoy high reputation from your markets and obtain more orders.
6)What about the price terms?
CIF, CFR, FOB
7)How about the payment terms?
ONE:30% T/T in advance, 70% balance against B/L copy.
TWO:L/C at sight.
8)What about the lead/shipping time?
Within 5~25 Days After Receipt Of Payment.
9)What is the MOQ?
20-25 Tons For One Full 20ft Container Load.
10)What about the package?
Forward Welding Package/Neutral Package/OEM Package