We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
Master Bond EP3HTSDA-1 is a single part, no mix epoxy adhesive designed primarily for die attach applications. It exhibits a die shear strength of 20-22 kg-f and has a high thermal conductivity of over 40-45 BTU•in/ft2•hr•°F [5.7-6.5 W/(m•K)].
This 100% solids formulation has an ideal viscosity and flow for die attach, will not ‘tail’ and can be easily dispensed automatically. Additionally it has an unlimited working life at room temperature and will cure in 20-30 minutes at 250°F or 5-10 minutes at 300°F.
Rohit Ramnath, Senior Product Engineer, Master Bond
Master Bond EP3HTSDA-1 is NASA low outgassing approved. Dimensionally stable, it has a Shore D hardness of 75-85 and is engineered to withstand thermal cycling and shock. This epoxy system adheres well to metals, ceramics, and silicon dies. The service operating temperature range is from -80°F to +400°F.
This product contains silver fillers and has a volume resistivity of <0.001 ohm-cm. It retains conductivity upon aging and provides excellent moisture and chemical resistance. This compound is formulated for applications in the communication, aerospace, medical, electronic, automotive, and defense industries. Master Bond EP3HTSDA-1 is available for use in syringe applicators.
Watch a visual demonstration of EP3HTSDA-1 and request a datasheet.
Please use one of the following formats to cite this article in your essay, paper or report:
Master Bond Inc.. (2021, March 18). Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity. AZoM. Retrieved on May 28, 2022 from https://www.azom.com/news.aspx?newsID=55776.
Master Bond Inc.. "Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity". AZoM. 28 May 2022. <https://www.azom.com/news.aspx?newsID=55776>.
Master Bond Inc.. "Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity". AZoM. https://www.azom.com/news.aspx?newsID=55776. (accessed May 28, 2022).
Master Bond Inc.. 2021. Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity. AZoM, viewed 28 May 2022, https://www.azom.com/news.aspx?newsID=55776.
Do you have a review, update or anything you would like to add to this news story?
In this interview, AZoM talks to Chris Aylott, Senior Engineer at Newcastle University, about fatigue testing in the development of low carbon transport solutions.
AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.
In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.
This product profile outlines the Versa Flex Checkweighers from Thermo Fisher Scientific.
The LQA 300 FT-IR wine analyzer combines performance, accuracy, ease-of-use, and speed for the analysis of finished wine, must and must under fermentation samples in less than 45 seconds—all in one compact solution.
The SpectraStar™ XT-R Benchtop NIR can analyze virtually any sample type in less than a minute, including solid, slurry, or liquid samples.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022